Hammerite Metal Paint Smooth Finish

Product Code: PNT557

£41.08 Ex VAT each £49.30 Inc VAT each

This multi-purpose paint can be applied directly onto rusted surfaces to act as a primer, an undercoat and as a topcoat all in one action! Solvent-based, this paint is quick drying, easy to use and provides long term protection against the build up and appearance of rust.
Available in black or white and in sizes 250ml, 750ml and 2.5L.

Inc Vat Ex Vat
£41.08 Ex VAT each £49.30 Inc VAT each

This multi-purpose paint can be applied directly onto rusted surfaces to act as a primer, an undercoat and as a topcoat all in one action! Solvent-based, this paint is quick drying, easy to use and provides long term protection against the build up and appearance of rust.
Available in black or white and in sizes 250ml, 750ml and 2.5L.

Specifications

Delivery

Returns

Specifications

Preparation Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush Remove dirt, dust and grease with diluted detergent. Rinse with clean water and allow time to dry Paint a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint On bare zinc, aluminium and galvanised surfaces apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint Note: Take special precautions to avoid inhalation of dust during surface preparation of pre-1960's paint surfaces as they may contain harmful lead. Application Ideal application temperature 8-25OC Lightly stir before use. Do not mix vigorously Do not mix paint from 2 tins or mix colours Brush application: Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient. On bare/rusty metal 2 coats are required. Ensure that all edges and corners are adequately covered. Do not over-apply as sagging will occur Conventional spray application: Thin with Hammerite Brush Cleaner & Thinners at a ratio of 15% Thinners to Paint. Set spray gun at 25/35psi and use full fan spray at maximum volume. Apply 4 thin coats. Allow 1 hour between coats. Refer to spray equipment manufacturer's guidelines for the correct and safe use of sprayers Touch dry 1-2 hours, recoatable after 4 hour After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners

Delivery

Only delivered to the South West of England, this product will only be delivered to postcodes within our branches network. To find out if this product can be delivered, please use the postcode search on the right hand side. For more information, please see our delivery information page

£15.00 inc. VAT

Check Your Postcode
Returns

Whether you have changed your mind or the goods you have received are faulty, and wish you to return the goods, please contact the issuing branchOur branch staff will be able to give you advice on the best way to return goods to us.

For our returns policy, please see our full terms and conditions.