Timloc Cavity Wall Weep Vent - 65 x 10 x 100mm - Terracotta
For use in any situation where water must be discharged from an external wall, including: At ground floor slab level / Within cavity tray systems / Over external lintels / Where a cavity must be ventilated/ On external walls – 100mm or more in thickness – built from brick, block, or stone.
Features & Benefits:
- Purpose made and pre-formed to guarantee reliable discharge of water.
- Less prone to inadvertent pointing-up than weep holes formed by simply leaving the perp. joint open.
- Integral front grille prevents entry of large nest building insects into the cavity.
- To work effectively the wall weep should be placed directly on top of the base of the cavity tray or DPC, or on to the front flange of the lintel.
- Range of colours to blend with brick or mortar colour.
- Satisfies all NHBC requirements.
- Manufactured to BS EN ISO 9001 and BS EN ISO 14001
- Complies with all relevant Building Regulations.
- Meets all relevant British Standards.
- Injection moulded in UV stabilised polypropylene.
For use in any situation where water must be discharged from an external wall, including: At ground floor slab level / Within cavity tray systems / Over external lintels / Where a cavity must be ventilated/ On external walls – 100mm or more in thickness – built from brick, block, or stone.
Features & Benefits:
- Purpose made and pre-formed to guarantee reliable discharge of water.
- Less prone to inadvertent pointing-up than weep holes formed by simply leaving the perp. joint open.
- Integral front grille prevents entry of large nest building insects into the cavity.
- To work effectively the wall weep should be placed directly on top of the base of the cavity tray or DPC, or on to the front flange of the lintel.
- Range of colours to blend with brick or mortar colour.
- Satisfies all NHBC requirements.
- Manufactured to BS EN ISO 9001 and BS EN ISO 14001
- Complies with all relevant Building Regulations.
- Meets all relevant British Standards.
- Injection moulded in UV stabilised polypropylene.
Weight | 1.00 kg |
---|---|
Manufacturer Code | 1143TE |
Brand | Timloc |
Colour | Terracotta |
Material | Plastic |
Vent Type | Cavity Wall |
Height | 65mm |
Length | 102mm |
Width | 10mm |
If you want to return this product, please complete a returns form. We will then contact you to let you know how to return your product.
We can't accept returns of this product without a completed returns form.
For our returns policy, please see our full terms and conditions.