Philmac 3G Metric/Imperial™ End Cap
WRAS approved for above and below ground use. Fits any standard of PE pipe including normal gauge, metric and imperial pipe types. No need for inserts or dedicated pipe fittings.
No pipe preparation nor force is required to push the pipe past the seal, so installation is fast and simple. Just insert the pipe into the fitting, tighten the nut by hand then with a wrench. For fast and easy connections between metric and imperial polyethylene.
Size: 25mm / 3/4”
Size: 25mm / 3/4”
Outside diameter: 55mm
Manufacturers code: 9039
Part of the Philmac universal platform of pipe fittings. Designed for the UK market to provide an insert free system. Manufactured from high-performance thermoplastic materials with outstanding impact, UV and corrosion resistance. Rated to 16 Bar (230psi). Connects
• Blue MDPE BS6572
• Black MDPEBS6730
• Low Density Class C BS1972
• Low Density Class D BS1972
• High Density Class C BS3284
• High Density Class D BS3284
• IRS 135 Heavy Gauge BS1972/61
No need for inserts or dedicated fittings.
Liners must be used with metric pipe sizes 20, 25, 32, 50 & 63mm
No pipe preparation is required and no force is needed to push the pipe into the fitting. In addition, a visual stop indicator reduces the risk of over tightening. No special tools are required and there is no need to disassemble the fitting before use – the Philmac Metric/Imperial compression fitting is supplied pre-assembled and ready to use.
No inserts required for Imperial pipes BS 1972/3284 and IRS 135 Heavy Gauge. Connection kits for copper and IRS 134 Normal Gauge are available.
£6.00 for all 'Standard' orders. These products will be delivered by our UK courier company and are delivered nationally with the exception of Northern Ireland and the Channel Islands. Please allow 3 - 5 working days for delivery.
Please see our Delivery section for more information.