Brickfill low resistance joint filler is manufactured from high quality closed cell polyethylene, the most satisfactory material for expansion joints in brick and blockwork.
Brickfill fully meets the British Standards for movement joints in brickwork. The British Standard states:
“The compressibility of the sealant back up/joint filler is possibly the most critical factor in the design of an adequate joint for clay fired brickwork. Flexible cellular polyethylene or foam rubbers are the most satisfactory materials. Hemp, fibreboard and similar materials should NOT be used”
BRICKFILL also meets the Department of Transport Specification 1015 for Roads and Bridges.
All pre-cut rolls have a scored tear off strip. Simply build in Brickfill flush with the surface of the brickwork and then pull off the “tear off” strip, leaving a correctly sized recess to allow for the installation of a suitable high performance silicon sealant. No need for a bond breaker.
This Fillcrete Brickfill Expansion Jointing is also available in 100 x 10mm size.
£15.00 for all 'Big & Bulky' orders. These products will only be delivered to post codes within our South West network. You will be contacted within 24 hours of ordering to arrange a delivery date. Please note that deliveries are to the kerbside only.
Please see our Delivery section for more information.