To seal a leak relieve the water pressure then apply the Fernox LS-X paste, while its seting you can drain the system if necessary. Apply Fernox LS-X straight from the tube. Using a spatula or knife, dipped into soapy water, mould the LS-X paste into shape (the soapy water will prevent adhesion or dragging). Replace the cap on the tube and allow an hour minimum for setting time. Setting time will depend on the thickness applied but spraying with water will speed curing.
Fernox LS-X can also be used as joining compound on your hot and cold water systems, including drinking water in place of traditional materials. Reinforcement is not usually required but can be used on larger pipe sizes and is recommended for larger leaks and high pressure systems.
£6.00 for all 'Standard' orders. These products will be delivered by our UK courier company and are delivered nationally with the exception of Northern Ireland and the Channel Islands. Please allow 3 - 5 working days for delivery.
Please see our Delivery section for more information.